Charging Mighty
- Every Mighty comes with a USB-to-3.5mm Aux-in charging cable.
- You will need to plug the USB end of your charging cable into a wall adapter (not provided) or a USB port on a computer. NOTE: Do not plug Mighty into your phone. Mighty does not sync using the cord, and phones can not charge Mighty. The charging cable should be plugged into a wall adaptor or a USB port on a computer.
- Make sure the charging cable is fully plugged in on on both the Aux (side that goes into Mighty) and the USB end (side that goes into wall adaptor/computer)
- If you are plugging into a computer USB to charge, ignore any messages that appear on your computer. Your Mighty is connecting to charge, and cannot exchange data via the charing cord.
- Mighty's LED will flash white (some people will see light pink) while being charged and will remain a solid white (some people will see light pink) when fully charged.
Charging Cable
Every Mighty comes with a USB-to-3.5mm Aux-in charging cable. These cables are designed specifically for charging your Mighty. Please only use the original charging Mighty cable to ensure proper functionality and to avoid potential damage to your Mighty.
- Use only the original Mighty charging cable provided with your device.
- Off-brand or third-party cables may have their polarities swapped, which can result in improper charging or permanent damage to your Mighty.
- Should you prefer an off-brand cable, this one has been tested and confirmed to work with Mighty. Please note that we can't guarantee the quality and reliability of off-brand cables.
Need a Replacement Charging Cable?
If your charging cable is lost or seems damaged, please contact our support team at heyo@bemighty.com for assistance.
Recommended Charging Blocks / Adapters
-
USB Wall Adapter (Charging Block)
- Use a charging block with an output of 5V DC and a current rating between 500mA (0.5A) and 1A.
- Avoid fast chargers or blocks with outputs of 2A or higher, as they can overheat the battery and shorten its lifespan.
- Always check your charger's label for voltage and current output.
-
USB Ports (on Computers or Laptop)
- Standard USB ports on computers or laptops (5V/0.5A) are safe and stable for charging your Mighty.
- Avoid high-powered USB ports (common on newer laptops and docking stations) that may output excessive current.
- If using a USB hub, ensure it is powered and delivers a stable charge.
- Note: Ensure your computer is powered on during charging. Otherwise, the USB port may not supply power.
-
Power Banks
- A reliable power bank that outputs 5V/1A is a great option for portable charging.
- Use power banks from reputable manufacturers to prevent voltage surges or unstable power output.
Powering Mighty On
To turn Mighty on, press and hold the Play button until the LED lights up. If your Mighty is plugged in and charging, you should see Mighty go from green power up, to a blinking white LED.
- With older generation Mighty players (Purchased prior to Oct 2023, Gen 1 and Vibe) Mighty will turn on and show a solid green LED for 20-30 seconds while it powers up. Mighty's LED will blink green once powered up
Powering Mighty Off
Press and hold the Play button for four seconds and your Mighty's LED will turn solid orange to indicate that your Mighty is powering off.
0 Comments